MB Star C4 SD Connect Mux Mercedes Star Diagnosis Compact 4 error SDnetControl “no signal” solution

MB Star C4 SD Connect Mux hot sell for a long time in world market for mercedes cars and trucks. Some customers may confused Can the old MB star C4 SD Connect multiplexer work with the new XENTRY/DAS, etc.? Here is a case ans solution also, which helps error SDnetControl “no signal”. Below OBD2Tuning.com sharing MB Star C4 SD Connect Mux Mercedes Star Diagnosis Compact 4 error SDnetControl “no signal” solution. 

Mercedes MUX C4 Mercedes star diagnosis Compact 4 with xentry 2016.7 win7 software



Mercedes Star Diagnosis Compact 4 error SDnetControl “no signal” Background:

2015.12v MB SD C4 software cannot work with 2013 sd connect c4 diagnostic system.

Operating system:
Windows XP

Error interface:
No signal

Self test results:
Selfdiagnostic
==============

ERROR:?Device?’100925?(2)’?isn’t?in?state?available

Device:?SDconnect/eCOM
Toolkit-Resultcode:?-1
Testresult:?0
Number?of?errors:?1
Number?of?warnings:?0

—>
Go to learn
“How to setup SD C4 software in HDD/ SSD”
Video guide:
https://youtu.be/1tulfRL-Wqc
Main Steps:
Set date and time same as the current
Step 1 – Run StartKeyCenter
Step 2 – Action to avoid Xentry reactivation
Step 3- Run Get Hardware ID
Step 4 – Run EPC & WIS
Step 5 – Add “license” to registry
Step 6 – Run EPC & WIS with new password
Step 7 – Network setup
Step 8 – Run SDconnect Toolkit
Step 9 – Diagnosis

This article is compiled by www OBD2Tuning com, if you have any advice on it, pls feel free to contact OBD2Tuning - China OBD2 Tuning Tool Automotive Diagnostic Tools Car Key Programmer OBD2ECU chip tuning tool Center.